====== Wake On Lan your Devices ======
----


**Xcalibur W** enables to power on devices by sending a magic packet over **UDP Port 7**.

===== Wake On Lan using Device Contextual Menu =====
----

Right-click a listed device to display the Device Contextual Menu.

{{ main_devices_listing:2.png }}

The **Wake On Lan** option will send a Wake On Lan Magic Packet **over the Lan** and **specifically for this device** instructing it to wake up.
To be fully functionnal, the Magic Packet shall be successfully transported over the network from the server down to the device. 

===== Wake On Lan using Publish Tasks window =====
----

When publishing a task, user can elect to Wake On Lan devices.

{{ publishing_tasks:1.png }}

If the //Wake-On-Lan// option is enabled and **at least one unit in the pool of target devices is powered on**, that **unit will send a Wake-On-Lan network event to other units** in the pool.


===== Wake On Lan using Power and Session Control command =====
----

The **Power and Session Control** command allows administrators to perform a number of low-level user session commands, including **Wake Up Computer**.

{{ commands_multiple:9.png }}

This requires that **at least one unit in the pool of target devices is powered on**, so that this **unit will send a Wake-On-Lan network event to other units** in the pool.