ChipPC - Xcalibur W Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.


====== Manually Configure the Client ======
----

**XcaliburW** agent can be manually configured to connect to its Management Server. By opening up the Web Interface, you can access the Agent Configuration in the Administration menu.

|{{ manually_configure_client:1.png }}|

When not enrolled, the **Manager Handler URL** is set to http://localhost. By entering the IP Address or URL of the Management Server, the Agent will then connect and register onto **XcaliburW** console. A reboot will be needed to complete the operation.


|{{:warning.png |}} The Address shall be provided in HTTP mode if there is no local SSL certificate installed on the unit prior. Once the Device is enrolled by XcaliburW, then the SSL certificate will be downloaded from the Server to the Client and the communication will turn automatically to HTTPS|

If you wish to set the Manager Address to HTTPs, you can use the SSL Certificate upload module to store the certificate locally on the Client Device.

{{ manually_configure_client:5.png }} 

Once the Agent is configured with a Manager Address, then the Address can be checked within the Agent Tray in the Windows Task Bar such as shown below.

{{ manually_configure_client:66.png }}

ChipPC - Xcalibur W Wiki

User Tools

Site Tools

Page Tools