ChipPC - Xcalibur W Wiki

For Server 2.14.x & Agent 2.14.x

User Tools

Site Tools


Sidebar

Getting Started

Server Software Installation

Client Software Installation

First Time Use

Enrolling Client Devices


Client Access Licenses

Discovering New Clients

Enrolling Client Devices

Manage Devices

Commands Glossary

Commands to Multiple Devices

Commands to Single Device

Library

Reporting Services

Monitoring and Preventive Maintenance

Automatic Policies

Notification

Manager Options

Plugins

Advanced

manually_configure_the_client

This is an old revision of the document!


Manually Configure the Client


XcaliburW agent can be manually configured to connect to its Management Server. By opening up the Web Interface, you can access the Agent Configuration in the Administration menu.

When not enrolled, the Manager Handler URL is set to http://localhost. By entering the IP Address or URL of the Management Server, the Agent will then connect and register onto XcaliburW console. A reboot will be needed to complete the operation.

The Address shall be provided in HTTP mode if there is no local SSL certificate installed on the unit prior. Once the Device is enrolled by XcaliburW, then the SSL certificate will be downloaded from the Server to the Client and the communication will turn automatically to HTTPS

If you wish to set the Manager Address to HTTPs, you can use the SSL Certificate upload module to store the certificate locally on the Client Device.

Once the Agent is configured with a Manager Address, then the Address can be checked within the Agent Tray in the Windows Task Bar such as shown below.

manually_configure_the_client.1518965276.txt.gz · Last modified: 2021/11/21 15:54 (external edit)