ChipPC - Xcalibur W Wiki

For Server 2.14.x & Agent 2.14.x

User Tools

Site Tools


Sidebar

Getting Started

Server Software Installation

Client Software Installation

First Time Use

Enrolling Client Devices


Client Access Licenses

Discovering New Clients

Enrolling Client Devices

Manage Devices

Commands Glossary

Commands to Multiple Devices

Commands to Single Device

Library

Reporting Services

Monitoring and Preventive Maintenance

Automatic Policies

Notification

Manager Options

Plugins

Advanced

monitoring_and_preventive_maintenance:rules_and_creating_rules

Rules and Creating Rules


Monitoring Rules View and Context Menu


From the Library, select the Monitoring Rules item to see a list of existing rules.

The list shows the rule name, status (enabled or disabled), creation date, and the number of devices to which the rule applies.

Right-click any rule to access the contextual menu:

  • Load Rule : Assign the rule to a selection of devices. The monitoring rule is then loaded in the Command Queue and can be published to devices.
  • Unload Rule : Unload the rule from a selection of devices. This creates a Task to unload the rule which shall be published to desired devices.
  • Show Details : Display the rule details including triggers, polling frequency, and the list of devices to which the rule applies.

  • Disable : Disables the rule for all devices to which the rule applies.
  • Edit : Modify the rule's parameters.
  • Remove : Deletes the rule.

Create new Monitoring Rule


Create a new monitoring rule by clicking the button at the bottom of the screen.

To create a rule, define trigger(s) to form the Conditions list. All available triggers are detailed in the Triggers Glossary.

Xcalibur W can record alerts as Incidents whose start and end dates are the dates of the first and the last alerts received.

Xcalibur W can optionally assign a maintenance task to a particular rule. This feature automatically executes a task when an incident is open and/or is closed. A Maintenance Task can be any of the tasks in the Task Templates section.

Xcalibur W can optionally notify by sending e-mails. As a result, email recipients are notifed whenever an incident starts or stops. The recipient lists can be set in the Notification section.

Add Triggers


When you add a new trigger, the following configuration screen allows you to provide the parameters for the selected trigger :

You can elect to define the number of consecutive matches for the condition that are required before raising an alert.

This option is available only for the following triggers :

sys.regexistsys.gen.resultsys.serv.started
sys.partition.freespacesys.diskdrive.healthsys.temperature
writefilter.cachesize.current

Load/Unload Rule


To assign a rule to devices (or unload), click Load Rule on the contextual menu, or just double-click the rule. A new command named Monitoring Rule is added to the Command Queue and can be published to the selected devices. For more information, see Publishing Tasks.

Rules are stored on the device file system in an unprotected area - part of the FBWF exclusions list.

If the device(s) are protected by an EWF Write Filter, activate/deactivate Maintenance mode in the task - otherwise, the rule may not persist onto the devices.
monitoring_and_preventive_maintenance/rules_and_creating_rules.txt · Last modified: 2021/11/21 17:18 (external edit)