ChipPC - Xcalibur W Wiki

For Server 2.14.x & Agent 2.14.x

User Tools

Site Tools


provide_manager_server_address_to_client_by_dhcp

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

provide_manager_server_address_to_client_by_dhcp [2013/06/19 09:00]
sebastien [DHCP settings - Add options]
provide_manager_server_address_to_client_by_dhcp [2021/11/21 16:00] (current)
Line 1: Line 1:
-====== ​Provision Agent Parameters with DHCP ====== ​+====== DHCP Scope Options ​====== ​
 ---- ----
  
-WanPulse ​Device Agent can use DHCP as a mean of obtaining parameters that will be automatically applied. You can choose if this mehtod is enabled or not by toggling the checkbox in the Agent Configuration page as show below. The default state is enabled.+Xcalibur W Device Agent can use DHCP as a mean of obtaining parameters that will be automatically applied. You can choose if this mehtod is enabled or not by toggling the checkbox in the Agent Configuration page as show below. The default state is enabled.
  
 (sebastien : mettre une image de la page Agent Configuration en entourant en rouge l'​option Enable DHC Scope option - comme j'ai fait pour Automatic Enrollement) (sebastien : mettre une image de la page Agent Configuration en entourant en rouge l'​option Enable DHC Scope option - comme j'ai fait pour Automatic Enrollement)
Line 29: Line 29:
 Make a right click on the server node, and then "Set Predefined Options..." ​ Make a right click on the server node, and then "Set Predefined Options..." ​
  
-{{dhcp:1.jpg}}+{{dhcp:dhcp1.png}}
  
 Click on "​Add..."​ then fill in the fields as below, and then "​OK" ​ Click on "​Add..."​ then fill in the fields as below, and then "​OK" ​
Line 37: Line 37:
 Redo the previous sequence for the WP Tag and the Manager Address Redo the previous sequence for the WP Tag and the Manager Address
  
-{{dhcp:3.jpg}}+{{dhcp:dhcp3.png}}
  
-{{dhcp:9.png}}+{{dhcp:dhcp4.png}}
  
 ==== DHCP Option 230 - WP FTP Update ==== ==== DHCP Option 230 - WP FTP Update ====
Line 46: Line 46:
 Select the 230 option in the drop-down list and fill in the fields as below Select the 230 option in the drop-down list and fill in the fields as below
  
-{{dhcp:4.jpg}}+{{dhcp:dhcp5.png}}
  
 ^  ^  ^  ^  ^  ^ 
Line 69: Line 69:
 Do the same for the option 231 Do the same for the option 231
  
-{{dhcp:5.jpg}}+{{dhcp:dhcp6.png}}
  
 ^  ^  ^  ^  ^  ^ 
Line 90: Line 90:
 Add in the DHCP option 232. Add in the DHCP option 232.
  
-{{dhcp:10.png}}+{{dhcp:dhcp7.png}}
  
 ^  ^  ^  ^  ^  ^ 
Line 103: Line 103:
 Click on the node corresponding to the scope covered by the tag, right click then "​Configure options..." ​ Click on the node corresponding to the scope covered by the tag, right click then "​Configure options..." ​
  
-{{dhcp:6.jpg}}+{{dhcp:dhcp8.png}}
  
 Select 230, 231 and 232 then validate. Select 230, 231 and 232 then validate.
  
-{{dhcp:11.png}}+{{dhcp:dhcp9.png}}
  
 The configuration is completed, you can see the 3 new options appearing. The configuration is completed, you can see the 3 new options appearing.
  
-{{dhcp:12.png}}+{{dhcp:dhcp10.png}}
  
  
Line 117: Line 117:
 ---- ----
  
-Edit dhcp file settings: /​etc/​dhcp/​dhcpd.conf and add following lines for WanPulse ​DHCP Scopes Options:+Edit dhcp file settings: /​etc/​dhcp/​dhcpd.conf and add following lines for Xcalibur W DHCP Scopes Options:
  
 on main section: on main section:
Line 137: Line 137:
   option routers 192.168.1.254;​   option routers 192.168.1.254;​
   option domain-name-servers 192.168.1.1,​ 192.168.1.2;​   option domain-name-servers 192.168.1.1,​ 192.168.1.2;​
-  option domain-name "wanpulse.com";+  option domain-name "chippc.com";
   option ntp-servers 192.168.1.254;​   option ntp-servers 192.168.1.254;​
   option WP_FTP_Update code 230 = string;   option WP_FTP_Update code 230 = string;
provide_manager_server_address_to_client_by_dhcp.txt · Last modified: 2021/11/21 16:00 (external edit)